wood floor refinishing

A well-finished wood floor looks cleaner and neater than it ever did before. However, sanding your wood floor is no like painting in that the finish isn’t applied and cured in several stages. Sanding is messy, too, and you will have to protect wood flooring from water damage with lacquer-based anti-water paints to protect your investment, keep it clean and dry and, as long as you can, avoid excessive sanding. This will help preserve your floors for a very long time.

Sanding wood floors is a crucial step in house construction and maintenance. You don’t want to do it wrong, or you’ll pay dearly for it down the road. Don’t get discouraged if you don’t get it right the first time; wood floor refinishing professionals can make mistakes, too. If you have the time and money available to spend on your wood floors, hire Wood Floor Refinishing San Antonio to refinish your old house instead of doing it yourself. Even if you are feeling more adventurous, don’t attempt to refinish the whole floor at once.

When you’re finished sanding, remove all the debris. Then, clear the area of all furniture, appliances, or anything else that could potentially cause deeper scratches in the wood floors. Then you’ll be able to start polishing your existing floors. Use only fine sandpaper for this, and be sure that it won’t scratch the surface you’re working on. A good wood floor refinishing kit can also reduce or eliminate all sanding required for deep scratches.

Before applying the finish, you need to clear any rough spots using chemicals. After that, you can start to stain your floor with your choice of stain or a ready-made color that matches your existing finish. Wood floor refinishing kits usually come with a ready-made stain, but you can buy one separately and apply it yourself if yours does not. Follow the instructions carefully when you’re applying the stain, so you don’t end up with a reddened or stained area.

After you’ve stained your area, use an orbital sander to ensure the sandpaper doesn’t scrape or damage the surface. Also, take the time to rinse your sandpaper between sanding. This will keep you from spreading the stain around, which can make the new finish appear uneven. Once the sandpaper is dry, you can then move on to the application of the new finish. Start by sanding the floor straight across until it’s completely smooth and flat. Then, work in small circles, going in a circular pattern.

When you stain your floor, be sure to mix a thick layer of the stain and leave it to dry thoroughly. You may need to use a hairdryer to heat the mixture, but try not to stay within the room for more than five minutes at a time. Let the wood floor refinishing solution sit for about five minutes, and then sweep or vacuum away the excess. When you are finished, be sure to allow the stain to dry completely before applying another finish coat.

Once you’ve thoroughly cleaned and stained your floors, you can now go ahead and do a quick recoat. To do this, take all of your tools and equipment and place them in a sturdy storage box. Make sure the boxes are far apart and in good repair. Fill the box with hot water and detergent. Please put in a lot of heavy-duty newspaper and let the solution sit for five to ten minutes before scrubbing it away with a floor scraper.

After the solution is done, take your putty knife and clean the edges of each nail that might be exposed. Then, put the end of the blade next to each nail and slowly pull the putty knife down. Remove all of the excess putties and vacuum away the remaining dust. Finish by sanding the floor smooth and shiny, then cover it up with a new finish.